Drip tape is a black, flat (without water) irrigation pipe. It has emitters and small holes, which can accurately, stably, and evenly deliver water to the roots of crops and plants.
Kérjük, legyen tudatában：
Ha ezen az oldalon nem találja az Önt érdeklő terméket, ez azért lehet, mert még nem töltöttük fel. Ha szeretné tudni a vonatkozó termékinformációkat, vagy szeretne együttműködni velünk, tudsz vegye fel velünk a kapcsolatot megkeresést küldeni.
Rainfaun is a manufacturer specializing in the production and export of irrigation products. Sokféle öntözési termék létezik, among which drip tape is one of our main products. Ningbói gyárunkban készülnek, Kína, and exported all over the world after multiple quality inspection procedures.
Általában, clients will send us information about the products they are looking for, and we will produce the products according to the customer’s requirements. This process is called OEM. Sok éves tapasztalattal, we have already possessed good production and customization capabilities. Our workshop has a lot of equipment, which runs efficiently and can greatly shorten the lead time in addition. We can also customize the material, szín, méret, megjelenés, csomagolási tervezés, logótervezés, stb. a termékek közül az ügyfelek számára. We can also provide clients with irrigation system solutions.
Ha azt szeretné, hogy termékeket gyártsunk Önnek, Kérem vegye fel velünk a kapcsolatot.
Drip tape is usually made of high-quality polyethylene (PE) plastic material, which has good corrosion resistance, rugalmasság, pressure resistance, könnyűség, and strength. Ráadásul, its surface has a UV-resistant coating. It is usually laid directly on the ground or buried shallowly in the soil. These characteristics allow it to adapt to various complex terrains.
It is a drip irrigation product. Compared with sprinkler irrigation products, it can directly drip water resources into the roots and soil of crops and plants, so it can maximize the use of water resources and avoid unnecessary evaporation and loss of water. To achieve accurate irrigation effects.
Its structure is not complicated. The main part is the pipe, and there is an emitter on the inner wall, which can drip water slowly and evenly. It can prevent blockage, and at the same time, it is used with filtering equipment to prevent the water flow in the pipe from mixing with impurities such as soil, leaves, and sand.
The following table list basic information about the product for your reference. Ha további információkat szeretne tudni, Kérem vegye fel velünk a kapcsolatot.
| Terméknév | Csöpögőszalag | Szolgáltatás | Oem, ODM, Testreszabott | |
| Fő anyag | Műanyag, PE | Csomag | Táska, Kartondoboz, vagy testreszabott | |
| Beír | Öntözőcsőrendszer | Származás | Ningbo, Kína | |
| Funkció | Víz és műtrágya szállítása | Átfutási idő | 1-30 Napok | |
| Szín | Fekete | Minta | Elérhető | |
| Alkalmazások | Öntözés | Szállítási módszerek | Óceáni áruszállítás, Légi közlekedés |
Drip tape can be divided into drip tape with continuous strip in line and drip tape with flat emitter in line. Its specifications are mainly reflected in diameter, emitter távolság, thickness, áramlási sebesség, stb. Please see the table below for details.
| Drip Tape With Continuous Strip In Line | Drip Tape With Flat Emitter In Line | |
| Átmérő(mm) | DN16 | DN16 |
| Falvastagság(mm) | 0.15-0.60 | 0.15-0.60 |
| Emitter Spacing(cm) | 10,15,20,30,33,50 | 10-100 |
| Munkanyomás(MPa) | 0.01-0.10 | 0.01-0.10 |
| Vízáramlás(L/h) | 0.85 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0/ 3.5 | 1.38 / 2.0 /2.1 / 2.7 / 2.75 /4.0 |
Unqualified drip tapes will have problems such as easy aging, cracking, clogging, and uneven water discharge, which directly affect the service life of the product and the effect of drip irrigation. Ezért, it is very important to learn how to choose a drip tape of qualified quality. Here are some tips for choosing drip tape:
The laying of drip tape is not complicated. You need to plan the drip irrigation area in advance, measure and determine the area of the drip irrigation area, the drip irrigation spacing, the location of the water source, and other data and conditions. And prepare the tools needed for laying, such as drip irrigation valves, drip irrigation fittings, scissors, punching tools, stb.
Első, you need to lay the main pipe and branch pipes. The main pipe is connected to the water source to guide the water flow to the irrigation area. The branch pipe is laid perpendicular to the main pipe.
Then connect the branch pipe to the drip tape. Drip tape can be laid by workers or machines. When laying, pay attention to avoid twisting, knotting, and deformation of the drip tape.
After the drip tape is laid, its end can be blocked with a plug of suitable size. Or simply fold the end and fix it with a rope/clip. This can prevent water from flowing out and avoid wasting water resources.
Drip tape is a kind of drip irrigation pipe, which can accurately deliver water to crops, plants, fruit trees, and flowers. They are widely used in farmland, kertek, gyümölcsösök, gyepek, greenhouses and other irrigation-related scenes.
Our drip tape has a quality inspection process during the production process. We have dedicated quality inspectors who will test the product’s appearance, méret, sealing, erő, toughness, tartósság, water flow uniformity, anti-clogging, tensile properties, anti-aging properties, and other aspects to ensure that the final product will not have any quality problems.
Íme néhány gyakran ismételt kérdés és válasz. Ha itt nem találja a választ, kérjük, kattintson a gombra, hogy megkérdezze tőlünk. A lehető leghamarabb válaszolunk.
© Ningbo Rainfaun Mezőgazdasági és Technológiai Co., Kft. Minden jog fenntartva
Kérjük, kattintson az alábbi gombra a csevegőablak megnyitásához.
Maradjon kapcsolatban, Köszönjük, hogy meglátogatta!
Belül fogunk válaszolni 12 órák, Kérjük, vegye figyelembe az e -mailt az utótaggal@rainfaun.com".
