Sommario
Modern irrigation technology has developed to the point where it has greatly improved irrigation efficiency and helped people solve many irrigation problems. People not only care about irrigation performance and water-saving effects, but are also very concerned about how to reduce costs.
In un sistema di irrigazione, costs can generally be divided into two aspects: one is the cost of product procurement, and the other is the cost of maintenance, repair, and replacement of the irrigation system in the later stages. The former is unavoidable, so we can focus on the latter.
As for the latter, thinking about how to extend the service life of irrigation equipment is a very good breakthrough point. Per prolungare la vita del sistema di irrigazione, Dobbiamo impegnarci per la manutenzione e la manutenzione dell'attrezzatura. Questo post te lo spiegherà in dettaglio.
Regularly Inspect Irrigation Equipment
It is important to develop the habit of regularly inspecting the irrigation system. Don’t wait until the equipment is damaged to deal with the problem, as this will increase costs. Check whether all parts of the irrigation system are working properly, including the sealing of the pipeline system, the wear and tear of equipment, e così via.
Clean the Filter Regularly
The filter is the device installed at the front end of the system. Before using the filter, it needs to be cleaned. You can fill the filter with water, then add a cleaning agent. After waiting for 30 minutes, start the backwash program of the filter. This process will clean the filter and make it ready for future use.
After multiple uses, the filter will inevitably accumulate some impurities inside, which will reduce the filtration effect. Perciò, we should clean the filter from time to time, especially the filter screen. If the screen is damaged, it should be replaced in time to avoid clogging problems.
Flushing the Pipelines
Dopo un uso a lungo termine, the inside of the pipelines will inevitably breed microorganisms and accumulate some unfiltered impurities. Perciò, maintaining and cleaning the pipelines is also very important, especially in environments with poor water quality, where the pipelines should be flushed more frequently.
Flushing the pipelines is very simple. We can open the plug of the pipeline, then open the valve to let the water flush through the pipe, and the dirty water will flow out from the opened pipe end.
Check All Components of the Pipeline System
The pipeline system is composed of pipes and components. The components include valves, couplings, gomiti, magliette, ecc., and they play a role in controlling water flow and making connections in the pipeline system.
We should regularly check whether these components are connected firmly, and whether there are any issues such as looseness or leakage. Water leakage in the irrigation system not only wastes water resources but also greatly reduces the irrigation effect. This is a problem we must avoid.
If you encounter a leakage problem, you need to locate the leaking part and repair or replace the component in time. If conditions permit, you can also install a smart pressure gauge at key positions in the pipeline system. The pressure gauge allows you to monitor pipeline pressure in real time. If the readings become abnormal, it may indicate a leakage problem.
Properly Control the System’s Working Pressure
The working pressure of the irrigation system should always be controlled within a suitable range. Se la pressione è troppo bassa, the irrigation system may not supply water or the efficiency may decrease. Se la pressione è troppo alta, the problem is even more serious because it may damage the equipment. Per esempio, irrigation pipes may burst, and connections may blow open.
We can install pressure gauges at key positions in the system to monitor pressure changes in real time so that adjustments can be made in time.
Winter Maintenance of the Irrigation System
Winter has always been a high-risk season for irrigation systems. Due to the low temperatures, water expands after freezing. Inoltre, plastic pipes become brittle in the cold. If there is residual water in the pipes, valvole, irrigatori, or other irrigation equipment, once it freezes, it may cause the equipment to crack. Perciò, anti-freezing treatment must be carried out before the coldest days of winter arrive.
If the irrigation system is not going to be used in winter, be sure to drain all the water from the equipment before shutting down the system. Primo, cut off the water source, close the main pipeline valve, and open the sub-pipeline valve to release pressure. Then open the drainage valve to drain as much water as possible from the pipelines.
Allo stesso tempo, during winter, valves should remain in the open position to prevent localized water accumulation from causing the valves to freeze and crack. Inoltre, check whether there is any residual water in the pump, filtro, fertilizer tank, and other equipment. For some important devices, we can add antifreeze inside, or we can remove and store them in a cool and dry place. This not only prevents freeze damage but also protects the equipment from ultraviolet exposure and premature aging.
If the irrigation system needs to continue working during winter, then we must carry out antifreeze measures for the pipelines and other equipment. You can wrap insulation materials such as thermal cotton around the pump, tubi, and other devices to effectively prevent the irrigation equipment from being damaged.
Parole finali
When it comes to irrigation equipment, we must adopt a scientific and effective management approach. Every inspection and maintenance activity should be properly recorded, and once a problem is found, it should be solved promptly. Inoltre, if the budget allows, IoT and smart facilities can be used in the irrigation system. This enables a more accurate, timely, and clear understanding of the working status of various parts of the system. If any issue occurs, the system will send an early warning, and engineers can solve the problem efficiently.
Ovviamente, the foundation of an irrigation system’s lifespan depends on whether the equipment itself has solid quality. When purchasing equipment, products made by professional manufacturers should be selected. This ensures good product quality and considerate after-sales service.
Finalmente, Per favore, permettimi di presentare la nostra azienda. Rainfaun è un produttore di prodotti di irrigazione con sede in Cina. Produciamo ed esportiamo prodotti come irrigazione a goccia E Sistemi di irrigazione, tra cui Valvola di irrigazione a goccia, raccordi per irrigazione a goccia, Dripline, nastro a goccia, gocciolare, Articolo di freccia, spruzzatore, Micro Sprinkler, pistola a pioggia, filtri, valvole, posizionare il tubo piatto, Raccordi per tubi in PVC, Raccordi PP, Raccordi del filo BSP, e così via. Puoi trovare informazioni A proposito di Rainfaun E i nostri prodotti Su questo sito Web.
Se desideri collaborare con noi, puoi clicca qui Per compilare il modulo.
Autore: Allen e Michael
Editore: Michael
Revisore dei contenuti: Michael
