기존의 지혜를 넘어서: 어떤 드립 테이프가 더 막히지 않는지?

두 가지 유형의 드립 테이프 (1)

목차

Drip tape generally comes in two types: flat emitter drip tape and continuous labyrinth drip tape. In most cases, flat emitter drip tape is considered more clog-resistant than continuous labyrinth drip tape. But is this always true?

As someone working in the irrigation industry, I have looked into the differences between these two types of drip tape and drawn on my own experience in the field. 이 기사에서, I would like to offer my own perspective: with improvements in manufacturing processes, modern continuous labyrinth drip tape can actually offer better clog resistance than flat emitter drip tape.

그래서, why is this the case? Let’s look at the differences from several angles.

What Are Flat Emitter Drip Tape and Continuous Labyrinth Drip Tape?

Drip tape is a flat tube, usually made of polyethylene (PE), that is laid on the soil surface or buried just below the ground.

The main difference between flat emitter drip tape and continuous labyrinth drip tape lies in their internal flow paths.

1. Flat Emitter Drip Tape: Small flat emitters are attached to the inner wall of the tape at regular intervals, usually every few dozen centimeters. These emitters control the water flow and release water through small outlets.

2. Continuous Labyrinth Drip Tape: Instead of having separate emitters at regular intervals, this type of drip tape has one continuous labyrinth channel attached along its inner wall. The channel is not divided into individual emitter units.

As shown in the images below, you can clearly see the differences between their internal flow path designs.

두 가지 유형의 드립 테이프 (3)

Why Has Flat Emitter Drip Tape Traditionally Been Considered More Clog-Resistant?

There are several reasons why flat emitter drip tape has traditionally been seen as a better option, especially when it comes to clog resistance.

1. A labyrinth design provides stable water flow

Flat emitters use a labyrinth design to regulate water flow and maintain relatively stable pressure. This helps keep water output consistent under different field conditions.

The spacing between emitters is also flexible. Common options include 10, 15, 20, 25, 그리고 30 cm, and custom spacing is available to match the distance between plants.

2. Each emitter works independently

The emitters are separate from each other. If one emitter gets clogged, the others can continue working normally.

This is probably the biggest advantage of flat emitter drip tape in the eyes of many users. A blockage in one emitter does not directly affect the water output of the others.

3. Continuous labyrinth drip tape has a simpler structure

Continuous labyrinth drip tape has a simpler design, with one continuous channel instead of separate emitters.

하지만, since the labyrinth channel is connected along the entire length of the tape, a blockage in one section may affect water flow through the rest of the channel. In some cases, this can make the affected section of tape unusable.

For these reasons, many people, including experienced professionals in the irrigation industry, have traditionally considered flat emitter drip tape more clog-resistant than continuous labyrinth drip tape.

Why Do I Think Continuous Labyrinth Drip Tape Is Now More Clog-Resistant Than Flat Emitter Drip Tape?

I agree with the advantages of flat emitter drip tape mentioned above. 하지만, I believe these advantages are based on the traditional designs of the two types of drip tape.

Things have changed. Manufacturing processes for continuous labyrinth drip tape have improved over the years. These improvements have greatly increased its clog resistance. 사실은, modern continuous labyrinth drip tape can now perform better in this respect than flat emitter drip tape.

I believe this improvement mainly comes from two changes: a wider labyrinth channel and an improved outlet design.**

1. A Wider Labyrinth Channel

The labyrinth channel in modern continuous labyrinth drip tape has been widened. A wider channel gives water and impurities more room to pass through, making it less likely for the channel to become blocked. Some particles and small debris can pass through the channel and be flushed out with the water.

2. An Improved Water Outlet Design

Another important improvement is the water outlet. With better punching equipment, the outlets can now be cut more cleanly and precisely. The cuts are smooth and tight, allowing water to flow out freely.

This improved outlet design also helps solve two common clogging problems.

첫 번째, it helps prevent sediment from entering the drip tape through the outlets.

When the water supply is turned off, the pressure inside the drip tape drops. This can create a siphon effect, drawing soil particles and sediment into the emitters through the water outlets.

Flat emitter drip tape has round outlet holes, which can allow sediment to enter and accumulate inside the emitters, eventually causing blockages.

In contrast, the outlets of continuous labyrinth drip tape are narrow slits. When the water supply stops, these tight cuts tend to close up, making it harder for ordinary soil particles and sediment to enter the channel.

두번째, it helps prevent root intrusion.

Plant roots naturally grow toward sources of water. When drip tape is installed just below the soil surface, roots may grow toward the water outlets. With flat emitter drip tape, roots can sometimes enter the round outlet holes and grow into the emitters, causing blockages.

The outlets of continuous labyrinth drip tape are narrow, tight slits rather than round holes. This makes it much harder for roots to enter the channel and cause blockages.

Taking all these factors into account, I believe modern continuous labyrinth drip tape can actually offer better clog resistance than flat emitter drip tape.

최종 생각

I hope this article has helped you better understand the clog resistance of different types of drip tape and given you some useful information when choosing the right product for your irrigation system.

Before wrapping up, let me briefly introduce our company.

Rainfaun is a China-based irrigation products manufacturer. We produce and export a range of irrigation products, 포함 점적 관개 제품, 스프링클러, 밸브, 파이프 및 피팅.

You can learn more about our company and products throughout this website.

우리와 함께 일하는 데 관심이 있다면, 제발 여기를 클릭하십시오 to fill out the inquiry form. We look forward to hearing from you.

작가: 남자 이름
편집자: 남자 이름
컨텐츠 검토 자: 남자 이름

사무실 주소

아니요. 277, 순더 로드, 하이슈구, 닝보, 저장성, 중국

이메일 주소 & whatsapp

우리의 소셜 미디어를 팔로우하세요

  • 맥스. 파일 크기: 10MB.
  • 허용되는 파일 형식: jpg, png, PDF.

WhatsApp에서 우리와 채팅하십시오

채팅 창을 열려면 아래 버튼을 클릭하십시오..

연결 상태를 유지하십시오, 방문해 주셔서 감사합니다!

지금 견적 받기 !

이내에 답변해드리겠습니다. 12 시간, 접미사로 이메일에주의를 기울이십시오.@rainfaun.com'.