How to Reduce Head Loss in Irrigation Pipes

From the previous section, we already understand what head loss is and the main factors that affect it. So now, we can take targeted measures to reduce head loss. 아래에, I will introduce some of the main methods one by one.

Increase the Pipe Diameter

Increasing the pipe diameter can enlarge the internal space of the pipeline, which can reduce the speed of the water flow. Accordingly, the friction between the pipe wall and the water will also decrease, which can effectively reduce head loss.

But it is also worth noting that increasing the pipe diameter will lead to higher costs. 그러므로, when engineers choose the pipe diameter, they need to find a balance between pipe size and cost, without affecting the water supply performance.

Choose Pipe Materials with Smoother Inner Walls

Different pipe materials have different inner wall friction coefficients. If the inner wall is rough, it will increase frictional resistance, which in turn will increase head loss. 그러므로, we recommend using pipes with smoother inner walls when building a pipeline system. 예를 들어, plastic pipes and stainless steel pipes are better than cast iron pipes.

For irrigation systems, plastic pipes are basically sufficient. 예를 들어, qualified PE pipes and PVC pipes have very smooth inner walls and can effectively reduce head loss.

Control Water Flow Speed and Pressure

In water supply engineering, faster water flow is not always better. Because when the flow speed is too high, it will also increase head loss. 그러므로, as long as it does not affect the supply effect, appropriately reducing the flow speed or water pressure can help reduce head loss.

Water flow speed, 수량, and pipe diameter all affect each other. If you want to learn more about the relationship between them, 당신은 할 수 있습니다 read this article.

Reduce the Use of Fittings

In a complex pipeline system, pipes need to branch and turn, so a large number of elbows, 티셔츠, 십자가, and other fittings are used. Each fitting will increase head loss.

Although the impact of a single fitting is small, if too many are used, the resulting head loss cannot be ignored.

그러므로, it is necessary to design the pipeline network reasonably and try to reduce the use of elbows, 티셔츠, 십자가, and other fittings.

Use Long-Radius Elbows

If it’s unavoidable to use many elbows, I would recommend using long-radius elbows. These elbows allow water to flow more smoothly and less violently when turning, which helps reduce head loss.

It’s easy to understand with an example. When we drive, going through a sharp turn is dangerous and easy to cause rollover. But if the car goes through a gentle curve, it is relatively safer and more stable.

Use Flexible Pipes and Fittings

Compared with rigid pipes and fittings, flexible ones can better absorb the impact of water flow and reduce head loss.

Reduce Water Transport Distance

The longer the pipeline, the more frictional loss it produces, and the greater the head loss. 그러므로, we need to lay out the pipeline network reasonably, avoid unnecessary pipeline installations, and shorten the water transport distance as much as possible. That way, head loss can also be reduced.

Pipeline Maintenance

During the use of the pipeline system, regular maintenance is necessary. Mainly equipment maintenance and cleaning of blockages.

If equipment (such as filters, 밸브, water pumps, 등.) has problems, it will certainly cause energy loss. So timely maintenance and replacement of equipment are essential.

And if there is blockage inside the pipeline or in the end-use equipment (스프링클러와 같은, 드리퍼, 등.), head loss will also increase. So it’s necessary to clean sediment, 미사, and other impurities from the system in time to ensure smooth water flow.

Increase Water Temperature

This method is not commonly used in practice. But it can be mentioned as an interesting piece of lesser-known knowledge.

Water temperature is closely related to water viscosity. The higher the water temperature, the lower the viscosity. And the lower the viscosity, the less frictional resistance the water will face when flowing through the pipe, which means less head loss.

So appropriately increasing the water temperature can reduce head loss.

하지만, considering cost, temperature stability, pipe compatibility, construction difficulty, and other factors, I do not recommend using this method. 사실은, making good use of the previous methods is already more than enough!