Sprinklers are a type of sprinkler used mainly in agricultural irrigation. They are one of the most important parts of the sprinkler system, because, with them, water droplets can be sprayed onto the surrounding crops and plants without reservation.
There are many different types of sprinklers, and the styles are varied. Common sprinklers can be divided into six types: impact sprinklers, wobbler sprinklers, butterfly sprinklers, G shaped micro sprinklers, pop up sprinklers, and meg rotating sprinklers. They are also equipped with nozzles of different specifications to achieve a variety of flow rates and spraying ranges.
주의하십시오：
이 페이지에서 관심있는 제품을 찾지 못하면, 아직 업로드하지 않았기 때문일 수 있습니다. 관련 제품 정보를 알고 싶다면, 또는 우리와 협력하고 싶습니다, 당신은 할 수 있습니다 저희에게 연락주세요 문의를 보내기 위해.
Rainfaun은 전문가입니다 제조업체 of irrigation sprinklers. We have a wide range of irrigation sprinklers, which are roughly divided into impact sprinklers, wobbler sprinklers, butterfly sprinklers, G shaped micro sprinklers, pop up sprinklers, and meg rotating sprinklers. 본사와 공장은 Ningbo에 있습니다, 중국. All the irrigation sprinklers we manufacture in our production base will go through multiple quality inspection procedures. 제품에 품질 문제가 없는지 확인한 후, 그들은 신중하게 포장되어 닝보 항구로 보내져 선박으로 전 세계 모든 지역으로 배송됩니다.. 물론, 제품의 양이 작은 경우, 우리는 또한 운송 시간이 짧은 항공 운송을 사용할 것입니다..
고객과의 협력 프로세스는 매우 표준화되고 복잡하지 않습니다.. 대개, 고객은 원하는 제품에 대한 정보를 보내드립니다., 그리고 우리는 먼저 고객과 함께 샘플을 확인할 것입니다.. 샘플이 올바른 경우, 주문 제작을 진행할 것입니다. 이 과정이 호출됩니다 OEM. 다년간의 경험으로, 우리는 매우 안정적인 생산 능력과 유연성을 가지고 있습니다 사용자 정의 기능. 우리는 자료를 사용자 정의 할 수 있습니다, 색상, 크기, 모습, 포장 디자인, 로고 디자인, 등. 고객을위한 제품의. 게다가, we can also provide customers with sprinkler irrigation system solutions.
우리가 당신을 위해 제품을 생산하길 원한다면, 또는 상담하고 싶은 질문이 있습니다, 제발 저희에게 연락주세요.
Sprinklers are devices that can spray water resources for crops and plants. They can simulate the effect of rainfall and evenly and comprehensively spread water droplets around. Some sprinklers spray finer droplets, like water mist, which is more convenient for soil penetration, improves water utilization, and can also reduce dust and temperature.
Sprinklers are made of metal and plastic. The sprinklers produced by our company are mainly made of high-quality plastic materials, PP와 같은, 포엠, ABS, 등. This type of sprinkler will be lighter, and at the same time, it still performs well in durability, 내식성, UV 저항, 그리고 다른 속성, and has a high-cost performance.
The following lists 6 types of sprinklers produced by our factory. If you want to know more about these products, 당신은 할 수 있습니다 저희에게 연락주세요.
We are a professional manufacturer of irrigation sprinklers. 다음 표는 참조용 제품의 관련 정보를 나열합니다.. 더 많은 정보를 알고 싶다면, 또는 우리의 사업에 대해 배우고 싶습니다, 제발 저희에게 연락주세요.
| 제품 이름 | 관개 스프링클러 | 응용 프로그램 | 관개 | |
| 주요 자료 | 플라스틱 | 서비스 | OEM, ODM, 사용자 정의 | |
| 색상 | Multiple Color, 또는 맞춤형 | 패키지 | 비닐 봉지, 판지 상자, 또는 맞춤형 | |
| Nozzle | Multiple Options | 기원 | 닝보, 중국 | |
| 특징 | 튼튼한, 부식성, UV-Resistant | 리드 타임 | 1-30 날 | |
| 유형 | 스프링클러 관개 용품 | 견본 | 사용 가능 | |
| 기능 | 물을 뿌립니다 | 운송 방법 | 해양화물, 항공 운송 |
아래에서 우리는 당신을 소개합니다 6 different types of irrigation sprinklers, each of which has its own characteristics and is an indispensable and important part of the sprinkler irrigation system.
물론, there are many more products for irrigation sprinklers. 여기에 보지 못한다면, 당신은 할 수 있습니다 저희에게 연락주세요 for more infomation.
Impact sprinklers are also called rocker arm sprinklers. They are mainly driven by water. When water is passed through, the water flow will impact the rocker arm, thereby driving the rocker arm to swing, so that the water flow can be sprayed over a wide range.
Our impact sprinklers are mainly made of high-quality plastic. They have a variety of nozzles to choose from. Nozzles of different specifications can achieve different flow rates and ranges of spraying effects.
Wobbler sprinklers can use water flow to impact their rotating device, thereby driving the sprinkler to rotate and swing 360 degrees, which allows the water droplets to evenly and comprehensively cover the surrounding irrigation area. The water droplets they spray are usually fine, and can even present an atomized effect, so the soil penetration effect is very good, especially suitable for use in densely planted areas.
They are more suitable for low-pressure work, and their new plastic material makes them very resistant to aging and corrosion.
Butterfly sprinklers can be installed vertically or inverted on the pipe. They can spray fine water droplets that can be evenly dispersed around, improving irrigation efficiency and providing nutrients for surrounding crops and plants.
They have many models that can be used in different water pressure environments, whether it is a short-range, medium-range, or long-range sprinkler irrigation environment, they can adapt.
As the name implies, G Shaped micro sprinklers look like a “G”. They are a type of micro sprinkler with low working pressure, small spray radius, small and fine water output, and water droplets. They are more suitable for close-range sprinkler irrigation and can spray water in 180° or 360° directions. The surrounding plants can absorb water resources accurately and comprehensively.
They are usually made of PP and POM, which are very durable and suitable for changeable and harsh outdoor environments.
Pop up sprinklers are a type of concealable, retractable sprinkler. When not in use, they are buried under the soil. When they are running, they automatically extend out of the ground using water pressure and spring devices, and then spray water in all directions (adjustable angles).
Their concealment is very suitable for scenes that require aesthetics, such as lawns and parks in cities.
Meg rotating sprinklers are round and look sleek. Their nozzles are on the top, hidden under the cover. When the water is not flowing, the cover completely covers the nozzle, which prevents impurities such as dust and insects from entering the sprinkler and causing damage. When the water is flowing, the water flow will lift the cover, and then the water droplets can be sprayed out 360°.
Our irrigation sprinklers can be used in all places where sprinkler irrigation is needed, 과수원과 같은, 정원, farms, 농장, 잔디밭, 온실, municipal projects, 등.
우리는 제품 포장에 매우 중요합니다., 당사의 제품은 전 세계적으로 수출해야하며 일반적으로 목적지에 도달하기 위해 장거리 바다로 배송해야하기 때문입니다.. 장거리 운송 중 제품이 손상되지 않도록 보호합니다, 우리는 고품질을 사용할 것입니다, 압력 저항성, 내마모성 포장재. 고객이 포장에 대한 특정 요구 사항이있는 경우, 고객 요구 사항에 따라 사용자 정의 할 수도 있습니다.
Not only can we manufacture irrigation sprinklers for customers, but we also have a professional team of engineers and experts who can provide customers with sprinkler irrigation system solutions. Building a sprinkler irrigation system requires planning and many factors need to be considered, 지형과 같은, 작물 유형, 심기 밀도, 토양 조건, 수원 조건, 관개 지역, 수량, 관개주기, 등. After making a plan and drawing construction drawings, we will list the various products needed, and then the engineers will guide the workers to carry out the specific construction stages of the sprinkler irrigation system.
Designing a sprinkler irrigation system that can work effectively is a professional matter. If you want to build such a system for your farm and plantation and are in urgent need of a good solution, 제발 저희에게 연락주세요.
다음은 자주 묻는 질문과 참조에 대한 답변입니다.. 여기에서 답을 찾을 수 없다면, 버튼을 클릭하여 요청하십시오. 가능한 빨리 답변하겠습니다.
이내에 답변해드리겠습니다. 12 시간, 접미사로 이메일에주의를 기울이십시오.@rainfaun.com'.
