Drip tape is a black, flat (without water) irrigation pipe. It has emitters and small holes, which can accurately, stably, and evenly deliver water to the roots of crops and plants.
ກະລຸນາຮັບຊາບ：
ຖ້າທ່ານບໍ່ພົບສິນຄ້າທີ່ທ່ານສົນໃຈໃນຫນ້ານີ້, ມັນອາດຈະເປັນຍ້ອນວ່າພວກເຮົາບໍ່ໄດ້ອັບໂຫລດມັນເທື່ອ. ຖ້າທ່ານຕ້ອງການຮູ້ຂໍ້ມູນກ່ຽວກັບຜະລິດຕະພັນທີ່ກ່ຽວຂ້ອງ, ຫຼືຢາກຮ່ວມມືກັບພວກເຮົາ, ທ່ານສາມາດ ຕິດຕໍ່ພວກເຮົາ ສົ່ງສອບຖາມ.
Rainfaun is a manufacturer specializing in the production and export of irrigation products. ມີຫລາຍປະເພດຂອງຜະລິດຕະພັນຊົນລະປະທານ, among which drip tape is one of our main products. ພວກເຂົາຖືກຜະລິດຢູ່ໃນໂຮງງານຂອງພວກເຮົາໃນ Ningbo, ຈີນ, and exported all over the world after multiple quality inspection procedures.
ໂດຍປົກກະຕິ, clients will send us information about the products they are looking for, and we will produce the products according to the customer’s requirements. ຂະບວນການນີ້ເອີ້ນວ່າ OEM. ມີຫຼາຍປີຂອງປະສົບການ, we have already possessed good production and customization capabilities. Our workshop has a lot of equipment, which runs efficiently and can greatly shorten the lead time in addition. We can also customize the material, ສີ, ຂະຫນາດ, ຮູບລັກສະນະ, ການອອກແບບການຫຸ້ມຫໍ່, ການອອກແບບໂລໂກ້, ປົງຄາຍ. ຂອງຜະລິດຕະພັນສໍາລັບລູກຄ້າ. We can also provide clients with irrigation system solutions.
ຖ້າທ່ານຕ້ອງການໃຫ້ພວກເຮົາຜະລິດຜະລິດຕະພັນສໍາລັບທ່ານ, ກະລຸນາ ຕິດຕໍ່ພວກເຮົາ.
Drip tape is usually made of high-quality polyethylene (PE) plastic material, which has good corrosion resistance, flexibility, ຄວາມຕ້ານທານຄວາມກົດດັນ, lightness, and strength. ເພີ່ມເຕີມ, its surface has a UV-resistant coating. It is usually laid directly on the ground or buried shallowly in the soil. These characteristics allow it to adapt to various complex terrains.
It is a drip irrigation product. Compared with sprinkler irrigation products, it can directly drip water resources into the roots and soil of crops and plants, so it can maximize the use of water resources and avoid unnecessary evaporation and loss of water. To achieve accurate irrigation effects.
Its structure is not complicated. The main part is the pipe, and there is an emitter on the inner wall, which can drip water slowly and evenly. It can prevent blockage, and at the same time, it is used with filtering equipment to prevent the water flow in the pipe from mixing with impurities such as soil, leaves, and sand.
The following table list basic information about the product for your reference. ຖ້າທ່ານຕ້ອງການຮູ້ຂໍ້ມູນເພີ່ມເຕີມ, ກະລຸນາ ຕິດຕໍ່ພວກເຮົາ.
| ຊື່ຜະລິດຕະພັນ | ເທບຢົດ | ການບໍລິການ | OEM, ອະນຸໂລມ, ປັບແຕ່ງ | |
| ວັດຖຸຕົ້ນຕໍ | ຍາງປະລາສຕິກ, PE | ຫໍ່ | Bag, ກ່ອງ, ຫຼືປັບແຕ່ງ | |
| ປະເພດ | Irrigation Pipe System | ຕົ້ນກໍາເນີດ | Ningbo, ຈີນ | |
| ຫນ້າທີ່ | Transporting Water And Fertilizer | ເວລານໍາພາ | 1-30 ມື້ | |
| ສີ | ດໍາ | ຕົວຢ່າງ | ມີໄວ້ | |
| ຄໍາຮ້ອງສະຫມັກ | ຊົນລະປະທານ | ວິທີການຂົນສົ່ງ | ສິນຄ້າຜະລິດຕະກູນມະຫາສະຫມຸດ, ການຂົນສົ່ງທາງອາກາດ |
Drip tape can be divided into drip tape with continuous strip in line and drip tape with flat emitter in line. Its specifications are mainly reflected in diameter, emitter spacing, thickness, flow rate, ປົງຄາຍ. Please see the table below for details.
| Drip Tape With Continuous Strip In Line | Drip Tape With Flat Emitter In Line | |
| Diameter(mm) | DN16 | DN16 |
| Wall Thickness(mm) | 0.15-0.60 | 0.15-0.60 |
| Emitter Spacing(cm) | 10,15,20,30,33,50 | 10-100 |
| Work Pressure(MPa) | 0.01-0.10 | 0.01-0.10 |
| Water Flow(L/H) | 0.85 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0/ 3.5 | 1.38 / 2.0 /2.1 / 2.7 / 2.75 /4.0 |
Unqualified drip tapes will have problems such as easy aging, cracking, clogging, and uneven water discharge, which directly affect the service life of the product and the effect of drip irrigation. Therefore, it is very important to learn how to choose a drip tape of qualified quality. Here are some tips for choosing drip tape:
The laying of drip tape is not complicated. You need to plan the drip irrigation area in advance, measure and determine the area of the drip irrigation area, the drip irrigation spacing, the location of the water source, and other data and conditions. And prepare the tools needed for laying, such as drip irrigation valves, drip irrigation fittings, scissors, punching tools, ປົງຄາຍ.
First, you need to lay the main pipe and branch pipes. The main pipe is connected to the water source to guide the water flow to the irrigation area. The branch pipe is laid perpendicular to the main pipe.
Then connect the branch pipe to the drip tape. Drip tape can be laid by workers or machines. When laying, pay attention to avoid twisting, knotting, and deformation of the drip tape.
After the drip tape is laid, its end can be blocked with a plug of suitable size. Or simply fold the end and fix it with a rope/clip. This can prevent water from flowing out and avoid wasting water resources.
Drip tape is a kind of drip irrigation pipe, which can accurately deliver water to crops, plants, fruit trees, and flowers. They are widely used in farmland, ສວນ, ສວນຫມາກໄມ້, grasslands, greenhouses and other irrigation-related scenes.
Our drip tape has a quality inspection process during the production process. We have dedicated quality inspectors who will test the product’s appearance, ຂະຫນາດ, sealing, ກໍາລັງ, toughness, ຄວາມທົນຊັດ, water flow uniformity, anti-clogging, tensile properties, anti-aging properties, and other aspects to ensure that the final product will not have any quality problems.
ນີ້ແມ່ນບາງຄໍາຖາມທີ່ຖືກຖາມເລື້ອຍໆແລະຄໍາຕອບສໍາລັບການອ້າງອີງຂອງທ່ານ. ຖ້າທ່ານບໍ່ສາມາດຊອກຫາຄໍາຕອບຢູ່ທີ່ນີ້, ກະລຸນາກົດປຸ່ມເພື່ອຖາມພວກເຮົາ. ພວກເຮົາຈະຕອບທ່ານໄວເທົ່າທີ່ຈະໄວໄດ້.
©ລະບົບວິທະຍາສາດກະສິກໍາແລະເຕັກໂນໂລຢີກະສິກໍາ Ningfo., ltd. ລິຂະສິດ:
ກະລຸນາກົດປຸ່ມດ້ານລຸ່ມເພື່ອເປີດຫນ້າຕ່າງສົນທະນາ.
ຕິດຕໍ່ພົວພັນ, ຂອບໃຈທີ່ທ່ານໄປຢ້ຽມຢາມ!
ພວກເຮົາຈະຕອບສະຫນອງພາຍໃນ 12 ຊົ່ວໂມງ, ກະລຸນາເອົາໃຈໃສ່ກັບອີເມວທີ່ມີຕົວປະກັນ "@rainfaun.com".
