Какие типы ирригационных систем используются в теплицах?

Июнь 21, 2025

В области сельскохозяйственного орошения, there is a special form of irrigation known as greenhouse irrigation.

Вообще говоря, agricultural cultivation is carried out outdoors, but this method heavily relies on the natural growth patterns of crops. In order to change the growth cycle of crops and plants, greenhouses came into being. Фактически, they are a form of indoor irrigation, allowing control over light, air humidity, temperature, и еще. By using them, people can artificially modify and adjust the environment and climate to suit crop growth, thus achieving the goal of off-season cultivation.

Greenhouse cultivation changes the growth cycle of crops, allowing consumers to enjoy non-seasonal fruits and vegetables at any time of the year.

Greenhouse farming involves a variety of different irrigation methods and technologies. This article will introduce these methods to the reader one by one.

Flood Irrigation

This is the most traditional irrigation method—just divert the water directly into the greenhouse. Although this method is simple and rough, and doesn’t require much investment in irrigation equipment, it has many disadvantages. It wastes a lot of water resources, easily causes high indoor humidity, and can trigger pests and diseases. Кроме того, it causes soil compaction, reduces soil aeration, and can lead to plant death due to poor root ventilation.

For greenhouse cultivation, it’s actually an irrigation method where the disadvantages outweigh the benefits. Поэтому, it has basically been phased out, and many regions no longer use this technique.

Furrow Irrigation

Furrow irrigation is an improved version of flood irrigation. Workers need to dig channels, then direct water into the greenhouse, where it flows along the furrows. The disadvantages of this method are similar to those of flood irrigation: large water volumes, easy water waste, уплотнение почвы, reduced soil aeration, increased humidity, and higher chances of pests and diseases.

Так, this irrigation method also has a low cost-performance ratio.

Капельное орошение

Drip irrigation is a relatively popular water-saving irrigation method. It introduces water through pipelines to areas near the plants, and then uses drippers, Стрелка капельные ставки, and other products to evenly and precisely deliver water to the plants.

Its features include low water usage, steady water flow, effective reduction of soil compaction, and significantly lowered humidity in the greenhouse. It is now a very popular irrigation method among farmers.

Спринклерное орошение

Sprinkler irrigation is also a water-saving technology. By installing sprinklers and spray heads on pipelines, water can be sprayed out like rainfall. The spray effect can be adjusted, including spray distance and water volume. Some spray heads can even achieve misting effects.

The advantages of sprinkler irrigation are similar to those of drip irrigation: low water usage, reduction of soil compaction, better root aeration for crops, and controlled indoor humidity levels.

Subsurface Irrigation

This method is commonly used in arid areas with water shortages. The working principle is to bury perforated pipes underground, allowing water to be delivered directly to plant roots, thereby conserving water resources.

It ensures that humidity does not increase after irrigation, reducing the risk of pests and diseases. Однако, it also has its downsides. Since the pipes are buried underground, clogging can easily occur. Также, the pipes cannot be easily moved, and maintenance or replacement is inconvenient.

Plastic Mulch Drip Irrigation

Plastic mulch drip irrigation is a type of drip irrigation. It involves laying mulch film over the vegetation in the greenhouse, and placing drip lines or drip tapes with emitters underneath the mulch. These can supply water one-to-one to each plant.

This method not only greatly reduces water waste, but also, thanks to the mulch cover, helps reduce water evaporation, prevents increased humidity in the greenhouse, and lowers the risk of pests and diseases.

Although plastic mulch drip irrigation is relatively complex, it is a very effective water-saving irrigation technology.

Последние слова

This article introduced six types of irrigation methods used in greenhouses. Each method has its own characteristics, but if you ask which irrigation method is the best, then without a doubt, it is drip irrigation and sprinkler irrigation. Because they not only provide the necessary water and nutrients for the off-season growth of vegetables, fruits, и цветы, but also effectively save water resources—they are truly representative of modern water-saving irrigation technologies!

Окончательно, Пожалуйста, позвольте мне представить нашу компанию. Rainfaun является производителем ирригационного продукта со штаб -квартирой в Китае. Мы производим и экспортируем такие продукты, как капельная орошение и Sprinkler Systems, включая капельный ирригационный клапан, капельная ирригационная фитинга, Dripline, капельная лента, капать, Стрелка капельная ставка, спринклер, Микроспринкер, дождевой пистолет, фильтры, клапаны, положить плоский шланг, ПВХ трубные фитинги, С., BSP Thread Fitings, и так далее. Вы можете найти информацию о Rainfaun и наши продукты на этом сайте.