目錄
In pipeline systems, we often encounter parameters such as flow rate, flow velocity, and pipe diameter. These data are very important; they are interconnected and play a key role in evaluating the stability and performance of the entire pipeline system.
Whether in municipal engineering, 行業, or irrigation, pipeline systems are widely used. These pipelines are usually used to transport water. When selecting pipes or during the construction of pipeline systems, engineers need to understand parameters such as flow rate, flow velocity, and pipe diameter, so that the most suitable pipes can be matched for the project.
The author believes that understanding the relationship between flow rate, flow velocity, and pipe diameter is very important. 所以, this article will provide a detailed explanation from four aspects: the meanings of the three parameters, their calculation formulas, the relationships among them, and a comparison table.
The Meanings of Flow Rate, 流速, and Pipe Diameter
In a pipeline system, flow rate refers to the volume of water passing through the pipe cross-section within a certain period of time, and it can be represented by “Q.” Its common units include cubic meters per second (m³/s), cubic meters per hour (m³/h), liters per second (L/s), liters per hour (l/h), 等等.
In a pipeline system, flow velocity refers to the speed at which water flows inside the pipe, and it can be represented by “V.” Its common unit is meters per second (m/s).
In a pipeline system, pipe diameter refers to the inner diameter of the pipe, and it can be represented by “D.” Its common units include millimeters (毫米) and meters (m).
Calculation Formulas of Flow Rate, 流速, and Pipe Diameter
There is a relationship between flow rate, flow velocity, and pipe diameter. They can be calculated using three sets of formulas. 下一個, please follow my reasoning closely as we derive these three formulas step by step.
第一的, let us clarify the related letter symbols. The calculation process will be expressed using these symbols. The symbols are as follows:
- Flow rate: Q
- Flow velocity: V
- Pipe diameter: d
- Pipe cross-sectional area: s
然後, it should be noted that because the vast majority of pipes are circular, the following derivation mainly applies to circular pipes. Our derivation direction is: to derive the calculation formula for flow rate based on known flow velocity and pipe diameter.
Step 1: Calculate the pipe cross-sectional area
The pipe cross-sectional area is essentially the area of a circle, and the pipe diameter is the diameter of that circle. 所以, knowing D, the area of the circle is easy to calculate. The formula is: S=πD²/4
Step 2: Calculate the flow rate in the pipe
From Step 1, we already know the pipe’s cross-sectional area, and we also know the flow velocity. 所以, the flow rate is easy to calculate. The formula is: Q=SV, or Q=VπD²/4
最後, using the flow rate formula derived in Step 2, we can also derive the calculation formulas for flow velocity and pipe diameter. These three formulas are shown below.
Q = π D² V / 4
V = 4Q / π D²
D = √(4Q / π V)
當然, they can also be expressed using more professional mathematical formulas：
流速之間的關係, 流速, and Pipe Diameter
Through the three formulas we derived above, we can clearly see the mutual relationship between flow rate, flow velocity, and pipe diameter. The summary is as follows:
1.When the flow velocity is constant, the flow rate is proportional to the square of the pipe diameter.
2.When the pipe diameter is constant, the flow velocity is proportional to the flow rate.
3.When the flow rate is constant, the flow velocity is proportional to the square of the pipe diameter.
Reference Comparison Table
From the above, we have already known the calculation formulas between flow rate, flow velocity, and pipe diameter. We should be able to skillfully use these formulas to calculate the values we want. 然而, it is undeniable that the calculation process is relatively complex, and when the units of the three parameters are not consistent, we also need to perform unit conversions.
所以, to improve efficiency, I provide you with a reference comparison table. This table lists the most commonly used parameters related to flow velocity, 流速, and pipe diameter in pipeline systems for your reference.
Please note that in this table, the unit for pipe diameter is “mm”, the unit for flow rate is “m³/h” and the unit for flow velocity is “m/s透明. (In the table, the parameters for flow velocity and pipe diameter include units, while the flow rate does not. This is to help ensure you do not confuse them.)
| Flow Rate, 流速, Pipe Diameter Comparison Table | ||||||||||||||
| 直徑(毫米) | 流速(m/s) | |||||||||||||
| 0.4m/s | 0.6m/s | 0.8m/s | 1m/s | 1.2m/s | 1.4m/s | 1.6m/s | 1.8m/s | 2m/s | 2.2m/s | 2.4m/s | 2.6m/s | 2.8m/s | 3m/s | |
| 20毫米 | 0.5 | 0.7 | 0.9 | 1.1 | 1.4 | 1.6 | 1.8 | 2 | 2.3 | 2.5 | 2.7 | 2.9 | 3.2 | 3.4 |
| 25毫米 | 0.7 | 1.1 | 1.4 | 1.8 | 2.1 | 2.5 | 2.8 | 3.2 | 3.5 | 3.9 | 4.2 | 4.6 | 4.9 | 5.3 |
| 32毫米 | 1.2 | 1.7 | 2.3 | 2.9 | 3.5 | 4.1 | 4.6 | 5.2 | 5.8 | 6.4 | 6.9 | 7.5 | 8.1 | 8.7 |
| 40毫米 | 1.8 | 2.7 | 3.6 | 4.5 | 5.4 | 6.3 | 7.2 | 8.1 | 9 | 10 | 10.9 | 11.8 | 12.7 | 13.6 |
| 50毫米 | 2.8 | 4.2 | 5.7 | 7.1 | 8.5 | 9.9 | 11.3 | 12.7 | 14.1 | 15.6 | 17 | 18.4 | 19.8 | 21.2 |
| 65毫米 | 4.8 | 7.2 | 9.6 | 11.9 | 14.3 | 16.7 | 19.1 | 21.5 | 23.9 | 26.3 | 28.7 | 31.1 | 33.4 | 35.8 |
| 80毫米 | 7.2 | 10.9 | 14.5 | 18.1 | 21.7 | 25.3 | 29 | 32.6 | 36.2 | 39.8 | 43.4 | 47 | 50.7 | 54.3 |
| 100毫米 | 11.3 | 17 | 22.6 | 28.3 | 33.9 | 39.6 | 45.2 | 50.9 | 56.5 | 62.2 | 67.9 | 73.5 | 79.2 | 84.8 |
| 125毫米 | 17.7 | 26.5 | 35.3 | 44.2 | 53 | 61.9 | 70.7 | 79.5 | 88.4 | 97.2 | 106 | 114.9 | 123.7 | 132.5 |
| 150毫米 | 25.4 | 38.2 | 50.9 | 63.6 | 76.3 | 89.1 | 101.8 | 114.5 | 127.2 | 140 | 152.7 | 165.4 | 178.1 | 190.9 |
| 200毫米 | 45.2 | 67.9 | 90.5 | 113.1 | 135.7 | 158.3 | 181 | 203.6 | 226.2 | 248.8 | 271.4 | 294.1 | 316.7 | 339.3 |
| 250毫米 | 70.7 | 106 | 141.4 | 176.7 | 212.1 | 247.4 | 282.7 | 318.1 | 353.4 | 388.8 | 424.1 | 459.5 | 494.8 | 530.1 |
| 300毫米 | 101.8 | 152.7 | 203.6 | 254.5 | 305.4 | 356.3 | 407.1 | 458 | 508.9 | 559.8 | 610.7 | 661.6 | 712.5 | 763.4 |
| 350毫米 | 138.5 | 207.8 | 277.1 | 346.4 | 415.6 | 484.9 | 554.2 | 623.4 | 692.7 | 762 | 831.3 | 900.5 | 969.8 | 1039.1 |
| 400毫米 | 181 | 271.4 | 361.9 | 452.4 | 542.9 | 633.3 | 723.8 | 814.3 | 904.8 | 995.3 | 1085.7 | 1176.2 | 1266.7 | 1357.2 |
| 450毫米 | 229 | 343.5 | 458 | 572.6 | 687.1 | 801.6 | 916.1 | 1030.6 | 1145.1 | 1259.6 | 1374.1 | 1488.6 | 1603.2 | 1717.7 |
結論
通過這篇文章, you should now clearly understand the relationship and calculation formulas among flow rate, flow velocity, and pipe diameter. I hope the content of this article is helpful to you.
最後, 我想介紹我們的公司. Rainfaun是一家總部位於中國的灌溉產品製造商. 我們生產和出口產品，例如 drip irrigation supplies, sprinkler supplies, 管道, and pipe fittings. 您可以找到信息 關於Rainfaun 和 我們的產品 在此網站上.
If you want to contact us, 你可以 點擊這裡.
作者: 邁克爾
編輯: 邁克爾
內容審閱者: 邁克爾
